• Home
• Products
• Services
• Test Request
• Contact

• Capabilities

  • Polymer identification
    We can identify the polymer used to make a plastic part. Polymer identification is an essential step to ensure that correct type and grade of polymer is used in the molding process. Polymer Identification can also reveal additional information about any additives, surface contamination, etc.More...
    
  • Polymer Melt and Glass Transition Temperatures
    Differential scanning calorimetry can be used to measure a number of characteristic properties of plastic samples. Using this technique it is possible to determine melting and crystallization temperatures as well as glass transition temperatures Tg. More
    
  • Filler Quantification
    Resins that are used to make plastic parts with, may have fillers such as glass fibers Magnesium Silicate. The quantity and quality of these fibers play a major role in performance of the plastic parts.More
    
  • Plastic Additives (Plasticizers, etc)
    Plasticizers are normally added to some polymers (such as PVC) to give flexibility.  The amount of plasticizer affects the performance of the plastic parts.  More...
    
  • Failure Analysis
    When plastic parts and other products fail, we can analyze these products or parts and provide the customers with a report describing the plausible cause of the failureMore...
    
  • Surface Contamination
    Some plastic parts fail due to presence of contaminants.  Silicone oil on polyethylene parts is an example.  We can test the surface of such parts and tell what the contaminant is.  More...
    
  • Plastic Parts and Other Product Qualtiy Control
     
  • Deformulation
    We help our customers who get their products manufactured abroad to ensure the ingredients used are as specified and their percentages.More
    
  • Heavy Metals & Elements (Lead, Mercury, Zinc, Arsenic,
  • Our lab has the capability to process plastic, water and other samples to quantify elements such as Lead, Mercury, Chromium, Hexavalant Chromium
  • 
    
  • Phthalates Quantification
    Phthalates are used as plasticizers in plastic parts.  Recent government regulations restrict manufacturers the amount of phthalate plasticizer that can be present in their plastic partsMore...
    
  • Instrumentation
    At Green Globe Laboratories, we have a wide variety of instrumentation and we keep adding more instrumentation. More...
    
  • Paints
    description goes hereMore...
    
  • Pharmaceuticals
    description goes hereMore...
    
  • Rubber
    description goes hereMore...
    
  • Materials Tested
    1. Plastic Parts
    2. Resins
    3. Rubber
    4. Paint
    5. Adhesives
    6. Cleaning Products
    7. Pesticides

(c) 2009 Green Globe Laboratories. Design by Free CSS Templates.